ICA™ 1200, Dual
600 Watt
|
ICA™ 2400, Dual 1,200
Watt
|
| |
|
|
|
These amplifiers are built from rugged,
high-quality components an circuits to protect your amplifier from
those "real world" occurrences. |
|
|
Load fault Correction™ instantaneously
reduces channel gain to allow the amplifier to operate at a safe level
into an abnormal load. |
|
|
The LFC circuit senses the short circuit
as abnormal load condition and reduces the channel gain to a safe
level for the load. |
|
|
Fade-In Protection - The amplifier
goes into protect mode and leaves the speaker load disconnected until
the amplifier determines that the operating status is normal. |
|
|
DC Voltage Protection detects DC voltage
or subsonic signals at its output terminals. |
|
|
The input connector accepts balanced
and unbalanced audio signals. |
|
|
Sequential Turn-On Connector. |
The ICA amplifiers are available as "V"
versions. The ICA "V" Series is designed specifically for 70
Volt and 100 Volt (export) distributed audio systems, without the need
for a transformer.
|
