VIEW COMPLETE PRODUCT LIST
BECOME A DEALER/DISTRIBUTOR
ASK THE PROS
CONTACT US
ALSO VISIT WWW.ACOUSTICALSURFACES.COM
SOUNDPROOFING MATERIAL
SOUNDPROOF WINDOWS
SOUNDPROOF DOORS
SOUNDPROOF ENCLOSURES
SOUND
ABSORBER
NOISE
BARRIERS
VIBRATION ISOLATION/DAMPING
ACOUSTIC BAFFLES/BANNERS
ACOUSTIC
CEILING TILE
DUCT
SILENCERS
CORNER
BASS TRAPS
SOUND INSULATION
ACOUSTIC
FOAM
ACOUSTIC WALL
PANELS FABRICS
SONEX
SEALANTS & ADHESIVES
ACOUSTIC ANALYSIS
SPEAKERS
MIC/AMPLIFIERS
HEARING PROTECTION
FIRE
RETARDANTS
GREEN/EARTH
FRIENDLY
Click On Your Acoustical Problem Below for More Information!

 
Professional Audio Equipment
Our newest addition of sound reinforcement products, (Amps, Mixers, Mics, assistive listening systems) add the perfect quality public address components to our acoustical products. ASI Pro Audio Acoustics feature Peavey, Gentner, Mipro, Soundtube , and Audio Technica.
Noise S.T.O.P.™ PHONIC® 5.1 Surround Sound Mixing Console


Click part number to request a quote, or to contact a Pro Audio professional
Part #
Description
PHONIC-5.1 2443 Non-Powered Mixer
With versatility suitable for 5.1 surround sound events including middle-size theaters, recording studios, and broadcasting, the MRSI-20 separates itself from all other mixing consoles. Its unique 3-knob surround panning system and low frequency effect routing switch represents the craftsmanship of PHONIC® engineers and our desire to offer incredible solution for the professional sound engineer.
Aux returns: 6 mono with surround panning.
Mono channels: 20 with 12-segment channel meter.
Mic preamps: 20.
Channel EQ: 3 and swept mid + low cut.
Talkback Mic: Built-in.
Buses: 6.
Pan control: 3-knob surround Pan (L/CR, F/B, Ls/Rs).
Faders: 60mm.
Peavy® XR® 1600F TRI Powered Mixer

Click part number to request a quote, or to contact a Pro Audio professional
Part #
Description
PXR1600F Tri-Powered Mixer
Three power amplifiers (200 watts ea. @ 4 Ohms).
Built-in crossover (150 Hz).
Digital effects with time/size and coor/tone controls.
Two 9-band EQs with FlS®.
14 XLR balanced mic inputs.
Feedback locators.
Effects time and color control.
Removable metal cover.
ICA™ 1200 Dual 600 Watt and ICA 2400 Dual 1,200 Watt - Industrial Commerical Amplifiers
ICA™ 1200, Dual 600 Watt
Part #
Description
ICA-1200 ICA 1200 AMP
ICA™ 2400, Dual 1,200 Watt
Part #
Description
ICA-2400V ICA 2400 AMP
   
These amplifiers are built from rugged, high-quality components an circuits to protect your amplifier from those "real world" occurrences.
Load fault Correction™ instantaneously reduces channel gain to allow the amplifier to operate at a safe level into an abnormal load.
The LFC circuit senses the short circuit as abnormal load condition and reduces the channel gain to a safe level for the load.
Fade-In Protection - The amplifier goes into protect mode and leaves the speaker load disconnected until the amplifier determines that the operating status is normal.
DC Voltage Protection detects DC voltage or subsonic signals at its output terminals.
The input connector accepts balanced and unbalanced audio signals.
Sequential Turn-On Connector.

The ICA amplifiers are available as "V" versions. The ICA "V" Series is designed specifically for 70 Volt and 100 Volt (export) distributed audio systems, without the need for a transformer.
Peavy Quadra™ 10, 12, 15 Architectural Acoustics Full Range 2 Way PA Speakers
Part #
Description
10" 2-way
12" 2-way
15" 2-way
Frequency response, 1 meter on-axis, swept-sine in anechoic environment. 74 Hz - 18 kHz (+/- 3 dB)
Usable low frequency limit (-10dB point): 57 Hz.
Power handling: Full Range:
• 250 W continuous •500 W program • 1,000 W peak
Sound pressure level, 1 Watt, 1 meter in anechoic environment: Full RanQe: -96.0 dB SPL, (2.83 V input)
Maximum sound pressure lever (1 meter): Full Range: -120.0 dB SPL continuous -126.0 dB SPL peak
Radiation angle measured at -6 dB point of polar response:
• 500 Hz - 1.6 kHz, Horiz. 120° ±25°, Vert 115° ±20°
• 1.6 kHz -5 kHz Horiz. 90° ±5°, Vert 70° ±10°
• 5 kHz -16 kHz Horiz. 80° ±10°, Vert 45° ±10°
Directivity factor, Q (Mean): 8.88 ±4.65
Directivity index, Di (Mean): 8.89 ±t2.04 dB
Crossover frequency (internal passive): Low
Frequency: Mid Frequency: 2.2 kHz
Time offset: Low Frequency: 0.00 ms, High
Frequency: Horn spatially aligned ms

Speaker Tree
Holds Speakers up to 80 lbs


Part #
Description
Speaker Tree
Soundtube RSi Series, Broadbeam™ Speaker Technology for Open Ceiling Applications
Truly superior sound quality, seamless coverage and timeless styling.
Brood BeamTM technology for more than twice the coverage of conventional speakers.
Ultra stiff, low resonance case-composite enclosure for cleaner, tighter bass.
Custom components engineered for maximum clarity of voice and music.
Single point mounting and safety system for cleaner installations.
Internal woofer safety cable for protection under any seismic condition.
8 Ohm and multi-tap 70.7/100 volt options for ordering and installation ease.
Internal woofer safety cable for protection under any seismic condition.
Weather resistant end cap and rust-proof grille for lasting durability.
Part #
Part #
Part #
Gentner™ Assistive Listening Systems – Proven Performance and Quality, ADA Approved,
A Must for All Public Meeting Places

Part #
TX-37A Transmitter
The TX-37 A is field tunable to 37 of the FCC approved channels for ALS. Its universal input accepts mic level, balanced and unbalanced line levels, and speaker level. Signal strength is adjustable to quarter power, half power, or full power. Audio processing eliminates clipping and over-modulation while providing superior sound quality, increased intelligibility, and dynamics control.
Transmits to an area of more than 700,000 square feet.
Universal input accepts a variety of audio sources.
Transmits on 37 FCC approved frequencies for RF (radio frequency)
assistive listening.
Built-in test tone for quick and easy receiver tuning.
Small size (just 1/2 rack unit chassis).

Part #
Digital-l Receiver
Rather than just increasing volume for the hearing impaired, make the audio more intelligible with the Digital-l receiver. Using digital channel selection, the Digital-l ensure the receiver will stay locked on to a particular frequency regardless of normal changes in humidity, temperature or rough handling. And the Digital-l is field channel selectable to all 37 FCC approved assistive listening frequencies.
Digitally tuned to lock on to desired frequency.
Convenient to use and easy to carry.
Extra-long battery life with two AA batteries.
Field tunable to all FM assistive listening channels.
Large ON/OFF/VOLUME control.

Part #
SRX Speaker Receiver
When your assistive listening applications require amplified sound, just switch on the SRX. It's wireless and battery operated, so you can place it anywhere. Like our other receivers, the SRX is field tunable across the 37 FCC approved frequencies for RF assistive listening. It is powered by six C size batteries or an included AC Adapter.
Wireless and battery operated, locate anywhere.
Use with alkaline or rechargeable NiCad batteries.
Field tunable to all RF assistive listening frequencies.
Maximum output power is 10 watts (5 watts RMS).
Easy to use.
MiPRO™ VHF Personal Wireless P.A. System, MA-101, Handheld or Lapel, Reliable and Affordable


Part #
Description
MA-101H Handheld Unit
MA-101L Lapel Unit
Click part number to request a quote, or to contact a Pro Audio professional
MA - 101 Personal Wireless P.A. System
Frequency Range - VHF 160MHz-250MHz.
Tone Squelch - 32.768KHz.
Oscillation Mode - Quartz-controlled.
Max. Deviation - 15KHz.
Antenna - Built-in.
Sensitivity - 12dBI/V at SN >8OdB
Power Supply - 12/2.7 AH rechargeable battery and intelligent charger with 16-18VDC/1 00- 260VAC switching power supply .
Power Output - 20W (RMS) / An Load.
T.H.D. - < 1 % Frequency Response - 50HZ. 15KHz:l: 3dB
Audio Input - Built-in wireless receiver, Line-in jock. Operating Time - 8 hours
Speaker - Built-in 5-inch high sensitivity full-range speaker
Charging Time - 4 hours (automatic rechargeable battery management).
Dimensions - 285(L) x 16O(W) x 178(H) mm 11.2(L) x 6.3(W) x 7.0 (H) in.
Weight - 2.95Kg /6.5Ibs. . Color - Block
Peavey® Escort 2000 Portable Sound System, Everything Needed for a Portable,
Transportable Sound System


Part #
Description
ESCORT-2000 Port PA System
Click part number to request a quote, or to contact a Pro Audio professional
This is it! The world's finest packaged portable PA system, all self contained in a molded case with wheels and handle that you can transport like a piece of carry-on luggage. When you reach your destination, open up the case, and you have two speakers, complete with connecting cables and speaker stands and a microphone with cable.
Features:
Convenient package with luggage-style handle and wheels for easy transportation.
Two 2-way speaker systems with 10 inch woofer and piezoelectric tweeter for high quality sound reproduction.
Two folding speaker stands and 25 foot speaker cables.
5-Channel powered mixer
Four XLR microphone inputs with 15 Volt phantom power.
Two stereo line level inputs. Each input has a bass, treble and reverb control.
Five band graphic equalizer with FLSTM.
PVi dynamic microphone with cable is also included.
Storage compartments for microphones, cables and accessories to get everything you need in the Escort
portable case.
All of the above comes with and/or goes inside the Escort portable, luggage-style case.
Unpacked: 60.40 Ibs.
14.75" H x 36.50" W x 16.00" D

Packed: 73.00 Ibs.
17.50" H x 40.25" W x 18.25" D