|
Click On Your Acoustical Problem
Below for More Information!
|
|
 |
 |
Sealants and Adhesives
ASI Pro Audio Sealants and Adhesives
are products that meet the high standards required for great
acoustical installation. Acoustic sealant helps in adding to
a wall system's STC or sound blocking dynamics and have been
tested to add up to 11% the STC of a wall construction. Our
ASI Pro Audio Adhesives are products that make installs a snap
weather it be spray adhesives, latex, adhesives, aggressive
adhesives for overhead applications or adhesives that work with
our various underlay (flooring) products. |
 |
|
|
|
Material:
|
29 oz. tube acoustical soundproofing
sealant. |
|
Features:
|
Essential for achieving high STC value
for sound isolation. |
|
Applications:
|
Wall/floor junctions to seal cracks
and voids per laboratory tested data. Heating and AC ducts, cold air
returns, exposed cracks, exposed joints, electrical and utility boxes. |
|
Coverage:
|
1/4" bead 86 lin.
ft. per tube, 3/8" bead 38 lin. ft. per tube. |
|
Color:
|
Gray. |
| Flammability: |
ASTM E-84 – 76,
Class A. |
|
YOU CAN LOSE UP TO 11% OF THE WALLS STC IF YOU DON’T
USE SOUNDPROOFING SEALANT!
|
|
Click part number to request
a quote, or to contact a Pro Audio professional
|
| STOPSEAL-29 |
Soundproofing Sealant |
29oz |
Tube
|
|
|
|
|
|
Material:
|
29 oz. tube acoustical adhesive |
|
Features:
|
Works with all acoustical wall panels |
|
Applications:
|
Wall adhesive for acoustical panels |
|
Color:
|
Available in light gray |
| Flammability: |
ASTM E-84 – 76,
Class A. |
| Wall Installations: |
1/4" perimeter bead
w/X and spots of STOP AD SP spray adhesive on both wall and panel |
| Coverage: |
1 tube= 89 linear feet
(1/4" bead) |
|
|
Click part number to request
a quote, or to contact a Pro Audio professional
|
| STOPAD-29 |
Soundproofing Sealant |
29oz |
Tube
|
|
|
|
|
Material:
|
Professional Spray adhesive. |
|
Features:
|
Very Aggressive |
|
Applications:
|
Foam wood, cardboard, paper, metal,
cloth, plastic, Echo Eliminator™ Sound Silencer™ |
|
Can Size:
|
15 oz. |
| Flammability: |
Flammable. |
|
|
|
Click part number to request
a quote, or to contact a Pro Audio professional
|
| STOPAD-SP |
Adhesive Spray |
15 oz |
Spray Can
|
|
|
|
Noise S.T.O.P. Pro Series Super AD™
is a Polyurethane panel adhesive that generates three times the power
of ordinary adhesives. It can be used indoors or outdoors and will last
as long as the products it is bonding. Bonds to nearly all surfaces. Great
for applying acoustical panels in overhead applications. USE IN WELL VENTILATED
AREA – CLASS IIIB Flammability. Do not expose to direct flame.
|
|
|
|
Material:
|
Professional Spray adhesive. |
|
Features:
|
Very Aggressive |
|
Applications:
|
Foam wood, cardboard, paper, metal,
cloth, plastic, Echo Eliminator™ Sound Silencer™ |
|
Can Size:
|
15 oz. |
| Flammability: |
Flammable. |
|
|
|
Click part number to request
a quote, or to contact a Pro Audio professional
|
| STOPADA-29 |
Aggressive Adhesive |
29oz |
Tube
|
| STOPADAG-1G |
Aggressive Adhesive |
1 Gallon |
Bucket |
|
|
|
Applying the Glue
|
|
|
1. To prepare
the glue mixture, read the manufacturer's instructions because,
once it is mixed, there is very little time to apply it. Wear
rubber gloves to avoid all contact. |
|
|
2. Proceed with
the application of the glue by lifting half of one Neutra-Phone
panel and half of a second panel |
|
|
3. Spread the
glue over the whole surface using a 3/16" (5mm) V-trowel.
Do not apply too much glue; this will not increase the panel's
adherence. Any excess glue will cause undulations in the Neutra-Phone
and cause problems during the installation of the floor covering.
Do the fist half of the panel, then the other half. For smaller
pieces, take them out completely; apply the glue, and put them
back in place. Continue applying the glue under all the Neutra-Phone
panels. |
|
|
4. When you
have finished, be sure that the corners and panel's edges are
completely flat. If necessary, use the floor-covering containers
as weights. |
|
|
5. Avoid walking
on the panels during the entire drying cycle |
|
|
6. Allow to
dry for at lease 24 hours before installing the plywood or follow
the recommendations of the glue manufacturer. |
|
|
