|
Click On Your Acoustical Problem
Below for More Information!
|
|
 |
 |
Vibration
Isolation
Vibration Isolation/Damping products
relieve vibration by allowing the vibration by allowing the
vibration a space/mechanism to dissipate. These products carry
a comparative IIC number to tell a customer how effective the
products is as far as vibration reduction. These vibration isolation
products can be used to stop vibration in floor to floor, room
to room and enclosures to relieve vibration transfer. |
|
|
| Material: |
Recycled rubber. |
| Pattern: |
Flat sanded face performance engineered,
diagonal grooves. |
| Features: |
Grooved underside minimizes underlay
contact between finished materials and sub-floor. Reduces ceramic
tile breakage caused by cracking and fissuring of concrete slabs.
Excellent floor to floor soundproofing. |
| Applications: |
For use as a subfloor in new and renovation
construction projects. Reduces impact noise and vibrations while reducing
airborne sound transmission. Great under hardwood, ceramic or carpet.
Can be used as finished floor. |
| Size: |
4' x 6' |
Thickness:
1/2" |
| Color: |
Black |
Weight:
65 lb. per sheet. 2.7 lb./sf. |
| Installation: |
ASI Mapi adhesive, nailed or screwed
down |
|
| Click part number to request a quote or
to contact a Sales Representative |
| Neut-164 |
4'x 6'x1/2"
|
26
|
25
|
31
|
35
|
41
|
48
|
to 70 / to 64
|
| Mapi-Ad |
1-Gallon 2 Part adhesive |
|
 |
| Neut-164 |
4' x 6' x 1/2"
|
| Neut-124 |
2' x 4' x 1/2"
|
| Click part number to request a quote,
or to contact a Pro Audio professional |
|
| The
Anti-Vibe™ Mats are specially designed to
block low frequency sound from traveling into floor systems.
Also great as an underlayment, under carpet, tile or hardwood. |
|
|
Anti-Vibe™
Speaker, Anti-Vibe™ Mats.
Sound Control Floor Underlayment
|
|
Cost Effective. |
|
|
Recycled rubber
material, performances engineered groves. |
|
|
High Performance
noise and vibration control. |
|
|
Pattern: Full
sanded face, diagonal groove back |
|
|
Installation:
adhesive, nailed or screwed down. |
|
|
Thickness: 1/2"
|
|
|
Sizes: 4'x6x1/2"'
or 2'x4'x1/2" |
|
|
|
Class
A-1 ASTM E-84
|
| Material:
|
Mass Loaded Vinyl. 1.25
lb. sq. ft. |
| Pattern:
|
Smooth finish. |
| Features: |
High density, limp material
to reduce transmission of sound. |
| Applications:
|
Reduced noise transmission
through ceilings, walls, floors, machinery enclosures,
duct-work. Apply over suspended ceilings on studs or joists. |
| Size: |
Rolls: 54" wide x
20" - Sheets 2' x 4' |
| |
Flammability:
UL94VO. |
Thickness:
1/8" - 1.25 lb. sq. ft. |
|
|
Optional: 1/2" lb.sq.ft., 1 lb./sf,2
lb./SF |
| Color: |
Standard
black or translucent. Optional tan, gray, (reinforced)
clear. |
| Installation: |
Material can be nailed,
glued, screwed, stapled or can be reinforced and grommeted
and hung link a curtain |
|
|
Click part
number to request a quote or to contact a Sales Representative
| .5B-24 |
2' x 4' (Sheet)
|
20
|
|
2' x 4' (Sheet)
|
28
|
|
2' x 4' (Sheet)
|
27
|
| .5B-20R |
20' X 4.5" (Roll)
|
20
|
|
20' X 4.5" (Roll)
|
28
|
|
20' X 4.5" (Roll)
|
27
|
| 1B-24 |
2' x 4' (Sheet)
|
27
|
|
2' x 4' (Sheet)
|
32
|
|
| 1B-20R |
20' X 4.5" (Roll)
|
27
|
|
20' X 4.5" (Roll)
|
32
|
|
SuperSound Barrier™
- Sound Absorption / Noise Reduction
|
| Size: |
Frequency (Hz) |
125Hz
|
250Hz
|
500Hz
|
1KHz
|
2Hz
|
4KHz
|
STC
|
| 1.25 lb./sq. ft |
Transmission Loss (dB) |
14
|
18
|
24
|
27
|
33
|
38
|
28
|
|
|
|
|
|
Click part number
to request a quote or to contact a Sales Representative
|
|
|
|
|
A-1 ASTM E-84
Nonflammable
|
 Click
part number to request a quote or to contact a Sales Representative
|
| Applications:
Mechanical
Housing and Enclosures |
Ships and boats.
Rapid Transit cars.
Fan and blower housings. |
Metal partitions and roof panels.
Bins, chutes, hoppers, machine guards.
Stadium seating |
| Features: |
|
Low Flame spread and smoke development rating per ASTM E-84-91A, ASTM
E-162 |
|
Meets FMVSS 302.
Non-haxardous, non-toxic.
Improves fatigue life and safety factor of treated surfaces.
Provides dielectric isolation and thermal insulation.
Unaffected by hydrocarbons such as oils. |
|
Resists alkalis, acids, corrosive gases, grease, detergents
and water. |
|
Easily trowled, brushed or sprayed on surfaces. |
| VBD-5 |
5 Gallon Pails |
60 lbs. |
VBD-55 |
55 Gallon Pails |
660 lbs |
|
| Rec. Max Service
Temp. |
325°
|
|
Flammability
|
ASTM E-84
|
Flame Spread 0
|
|
|
|
Smoke Index 0
|
|
A-1
|
ASTM-E-662
|
Smoke index 2
|
|
ASTM E 8-84
|
ASTM-E-162
|
Flame Spread 1
|
|
| Dry
Thickness |
Spray |
Brush |
Square
ft./Gal Trowel |
|
1/16"
|
50
|
35
|
25
|
|
1/8"
|
40
|
25
|
20
|
|
3/16"
|
30
|
20
|
15
|
| |
|
|
|
|
|
|
|
|
| Material: |
Extruded rubber. |
| Features: |
Extruded shape to fit wood beams
and studs. |
| Applications:
|
Metal or wood stud and joist
sound vibration isolation |
| Size: |
2 - 1/8" wide x 1-1/2"
height x 2" long. |
| Carton Size: |
100 Pieces or singles. |
| Installation: |
Friction fit over stud/joist
Install 16" o.c. |
|
Click part
number to request a quote or
to contact a Sales Representative
| SL |
Single Pieces |
| SL-C |
100 Piece Carton |
|
|
|
|
|
Click part number to request a quote or to contact a Sales Representative
|
Features:
|
|
Replaces
old fashioned less effective resilient channel. |
|
|
Sound
Transmission Class (STC) rating of 55, a full 19 dB greater
than lesser wall assemblies. |
|
|
Experiences
with the RSIC-1 have recorded remarkable improvements
of up to STC 20 on walls. |
|
|
Not
only is the RSIC-1 silencing the competitions with sound
elimination, the RSIC-1 is approved for U.L. Classification
in 139 Resistive Design Assemblies. UP to 4 (four) Hour
Fire
Endurance Tests. |
|
|
Tough,
durable, attractive. |
| "Field Impact
Isolation Class" (FIIC) 82: |
|
|
Replaces
old fashioned less effective resilient channel. |
|
|
Sound
transmission Class (STC) rating of 55, a full 19 dB greater
than lesser wall assemblies. |
|
|
| Tests: |
|
|
Report No. 7785-1-201
Challis Consulting P/L Australia |
|
|
FIIC
|
FSTC
|
|
Impact Insulation
Class
|
Sound Transmission
Class
|
|
FIIC 82
|
FSTC 55
|
|
|
|
|
|
| Material: |
1/8" mass loaded vinyl with 1
/4" foam decoupler.
Total thickness 3/8". |
| Features: |
High density, limp material with acoustic
foam decoupler to reduce noise transmission. |
| Applications: |
Reduced noise transmission
through ceilings, walls, doors, machinery,& equipment, enclosures,
PVC waste pipe, HVAC ducts. Apply on any solid surface or on door
under carpet for effective
noise containment. |
| Size: |
Standard 54' wide x 20' roll or 2'
x 4' pieces. (optional 30', 60' rolls). |
Thickness: |
3/8 ". |
| Flammability: |
UL 94-HFTI Class C (Class
A available upon request) |
| Colors: |
Available in black. |
| Installation: |
Materials can be adhered
to surface by glue or mechanical fasteners. |
| Acoustical: |
Sound transmission class/STC
27. |
| Properties: |
Per ASTM C 423. Helps
stop vibration through hard surfaces. |
Click part number to request a quote, or to contact a Pro Audio professional |
|
|
 |
|
Features:
|
Permanently resilient, steel frame,
fiberglass isolator pad. Constant natural frequency in wide load range.
Load capacities 20 lbs. to 200 lbs. (9 kg to 91 kg). 500% overload
fail-safe assembly. |
|
Specifications:
|
Hanger shall
consist of a fiberglass isolator encased in an antishort circuit reinforced
steel bracket which will accommodate up to #8 suspension wire or a
1/4" (6.35 mm) bolt or screw.
The fiberglass isolator shall be 1" (25 mm) thick, precompressed,
molded fiber glass produced by a multiple flame attenuation process
which generates nominal fiber diameters not to exceed 0.00022"
(5.6 microns) and shall have been stabilized by precompression ten
(10) times to three (3) times the maximum rated load of the material
used. The hanger assembly shall be zinc-plated reinforced steel and
shall carry a five (5) times maximum rated load overload without failure.
Hangers shall be Model AF. |
|
Applications:
|
For vibration isolation in suspended
ceiling applications. Use 1/4" bolt or screw or #8 suspension
wire. |
|
|
Click part number to request a quote,
or to contact a Pro Audio professional
|
| AF-100 |
20-100 lbs. |
0.27"
|
| AF-200 |
50-100 lbs. |
0.10"
|
|
|
|
|
  |
| Material: |
Durable, lightweight high performance
sound absorber/blocker made from recycled cotton. |
| Pattern: |
Economical, high performance, durable.
Can be used anywhere high performance cost effective sound absorption/soundproofing
is needed. |
| Applications: |
Schools, offices, community
rooms, auditoriums, churches, gun ranges, mechanical rooms, home theaters,
home studios, restaurants and equipment enclosures. |
| Size: |
2'x4', available in 3/4"
|
Thickness: |
2 ". |
| Color: |
SIDE A: Blue flat textured (finished)
SIDE B; Acoustically transparent, moisture resistant foil face. |
| Flammability: |
ASTM E-84 Class 1-A, nonflammable. |
|
| Click part number to request
a quote, or to contact a Pro Audio professional |
| BACCOMP-124 |
3/4" x 2 x 4' |
A
|
.02/11
|
53/10
|
98/13
|
1.10/15
|
99/31
|
99/31
|
90/17
|
|
|
|
|
 |
| Material: |
Open cell melamine or
polyurethane plus vinyl noise barrier and decoupler. |
| Pattern: |
Lightly sculpted or flat.
Hypalon, Tuftane, Mylar or Tedlar face increases durability and cleanability
making the surface dust, dirt, acid and oil resistant. NOTE: Pattern
and seam match are irregular. |
| Applications: |
Ideally suited to line
equipment enclosures. Commonly used to line walls and ceilings of
utility or mechanical rooms to absorb and contain the noise source.
Use where both sound absorption and noise reduction are needed. |
| Size: |
24" x 48",
48" x 48". |
Thickness: |
1-3/8". |
| |
MCOMP 124 Melamine Natural
white or gray hypalon. |
PCOMP 124 Polyurethane
Charcoal foam with light gray
Tuftane face. |
|
Flammability:
|
ASTM E-84 Class 1-A, nonflammable.
UL 94 HF-1 Class C. |
|
| Click part number to request
a quote, or to contact a Pro Audio professional |
| PCOMP-124 |
.37" X 2' X 4' |
22/.60
|
20/.81
|
32/.97
|
31/1.00
|
43/.90
|
28/.85
|
| MCOMP-124 |
.37" X 2' X 4' |
22/.60
|
20/.81
|
32/.97
|
31/.100
|
43/.90
|
28/.85
|
|
|
|
|
| Material: |
Recycled rubber. |
| Pattern: |
Flat, Semi-smooth. |
| Applications:
|
Effective impact
noise control and soundproofing. For use as a subfloor
in new and renovation construction projects. Reduces
impact noise and vibrations while improving airborne
sound transmission. Great under hardwood, ceramic
or carpet. |
| Size: |
23-3/4" x
23-3/4" sq. |
Thickness: 5/16" |
| Flammability: |
ASTM
E-84, Flame Spread: 83 Class C. Smoked developed:
315 |
| Color: |
Black |
| Installation: |
Adhesive ASI Poly
100. |
|
| Click part number to request a quote,
or to contact a Pro Audio professional |
| AK-22 |
3' x 33-1/3' Rolls |
| AK
Poly Ad |
-1 Gallon/2 part adhesive |
|
|
Click part number to request
a quote or to contact a Sales Representative
|
| Material: |
Open Cellular
rubber bonded to fiberglass/cellulose backing scrim |
| Pattern: |
Flat Textured |
| Features: |
Concrete floor
irregularities. Resists mold, mildew and fungus growth. Designed
for high traffic, long lasting floor impact noise control. |
| Applications:
|
Floor/ceiling
applications requiring impact sound privacy, apartments, condominiums,
schools, offices, hospitals. Great as acoustical carpet pad
and underlayment. |
| Size: |
54" c 48"
(216 sq. ft. rolls). |
Thickness: 5/16"
|
| Weight: |
130 lbs. roll (.6 lbs. / sq.ft.) |
|
|
|
|
A-
|
Ceramic Tile |
|
B-
|
1/1/2" Gypsum
Concrete |
|
C-
|
5/16" DuraCoustic®
(8mm) |
|
D-
|
2" x 10"
Wood Joist |
|
E-
|
5/8" Gypsum
Board |
|
F-
|
1/2" Resilient
Channels |
|
G-
|
6" R20 Fiberglass |
|
H-
|
3/4" Plywood |
|
|
|
|
|
|
Noise S.T.O.P. series 3000 horizontal ceiling
banners for all types of indoor arenas, sports
facilities, convention centers, multi-purpose
rooms, school gyms and auditoriums. Series 3000
banners are an inexpensive alternative to conventional
suspended ceilings and they are a aesthetically
pleasing alternative to excessive arena noise.
Panel lengths are 25" x 48'.
Series 3000 banner systems can easily work around
lighting, plumbing and mechanical by utilizing
a simple symmetric grommet system to allow attachment
to bar joist or roof deck. Use our Sound Silencer™,
Bass Buster™ or Echo Eliminator™ to
boost sound absorption at a low cost.
|
|
|
Click
part number to request a quote or to contact a Sales Representative
|
|
|
